Motor, Incline
|
|
|
Incline motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 16 | 2 | Screw | 50 | 3 | Screw | 2 | 4 | Screw | 6 | 5 | Wire, Green | 1 | 6 | Screw | 3 | 7 | Screw | 4 | 8 | Screw | 2 | 9 | Screw | 4 | 10 | Screw | 2 | 11 | Washer, Locking | 10 | 12 | Nut, Nylock | 8 | 13 | Tool, Belt Adjustment | 1 | 14 | Belt Adjustment Tool | 1 | 15 | Screw | 2 | 16 | Screw | 4 | 17 | Screw | 2 | 18 | Screw | 4 | 19 | Screw | 10 | 20 | Screw | 4 | 21 | Bolt, Motor | 2 | 22 | Screw, Self Drilling | 6 | 23 | Screw | 6 | 24 | Screw | 2 | 25 | Screw | 2 | 26 | Screw | 4 | 27 | Tool, Adjustment, Belt | 1 | 28 | PIN,CLEVIS,.375X1.800" 215942E | 1 | 29 | Pin, Locking | 1 | 30 | Washer, Lock | 2 | 31 | Washer, Flat | 2 | 32 | Screw | 1 | 33 | Nut | 2 | 34 | Hex Nut | 4 | 35 | Nylock Hex Nut | 2 | 36 | Tinnerman Clip | 3 | 37 | Retainer, Pin | 2 | 38 | Screw | 6 | 39 | Washer | 4 | 40 | CVR,DECKRAIL,ICLNB | 2 | 41 | LEFT FOOT RAIL | 1 | 42 | Decal,Warning | 1 | 43 | Spring, Deck, Front | 4 | 44 | Belt guide | 2 | 45 | Deck | 1 | 46 | Spacer | 2 | 47 | Roller, Front | 1 | 48 | NLA Magnet | 1 | 49 | Wire, Jumper, Black | 1 | 50 | Treadbelt | 1 | 52 | RIGHT FOOT RAIL | 1 | 53 | BKT,RR RLR,ARPS | 2 | 54 | Roller, Rear | 1 | 55 | LEFT REAR FOOT | 1 | 56 | RIGHT REAR FOOT | 1 | 57 | Wire Harness | 2 | 58 | HOOD,FRONT,ARPS | 1 | 59 | Belt, Drive, FLEXONIC | 1 | 60 | Motor, Drive | 1 | 61 | NLA Clamp, Sensor | 1 | 62 | RPM sensor | 1 | 63 | NLA Wire harness, 10" | 1 | 64 | Motor, Incline | 1 | 65 | Screw | 1 | 66 | FRAME,LIFT,ARPS | 1 | 67 | Wire tie | 4 | 68 | Wire, Jumper | 1 | 69 | Controller | 1 | 70 | Switch, On/Off | 1 | 71 | Cover, Motor, Lower | 1 | 72 | Power Cord | 1 | 73 | Grommet, Strain Relief | 1 | 74 | Cable Tie | 7 | 75 | Wire Tie | 1 | 76 | Wire harness | 1 | 77 | UPRIGHT | 2 | 78 | Plate, HR, Top, Left | 1 | 79 | Plug, Latch, Lower | 1 | 80 | NLA Latch, Storage | 1 | 81 | Knob | 1 | 82 | LEFT ACCESSORY TRAY | 1 | 83 | BASE,ARPS | 1 | 84 | BASE CAP | 2 | 85 | Spacer | 6 | 86 | Bumper, Leveler | 6 | 87 | Decal, Caution, English | 2 | 88 | EXTNSN,BASE,ARPS,LEG,L/R | 2 | 89 | Cable Tie, Mounting | 3 | 90 | LATCH BRACKET | 1 | 91 | Wheel | 2 | 92 | Plate, HR, Bottom, Left | 1 | 93 | Plate, HR, Top, Right | 1 | 94 | LEFT HANDRAIL | 1 | 95 | Cover, Handrail, Left | 1 | 96 | LT BOTTOM HANDRAIL COVER | 1 | 97 | CNSL,BASE,TRANS AM,ARPS | 1 | 98 | CRSMBR,CNSL SPPT,ARPS | 1 | 99 | PULSE BAR | 1 | 100 | Cover, Console | 1 | 101 | RIGHT ACCESSORY TRAY | 1 | 102 | HB,2 BEND,ARPS,RT | 1 | 103 | Cover, Handrail, Right | 1 | 104 | RT BOTTOM HANDRAIL COVER | 1 | 105 | Wire Harness | 1 | 106 | Fan, Left | 1 | 107 | Fan, Console, Right | 1 | 108 | Display, Console | 1 | 109 | Door, Access | 1 | 110 | Plate, HR, Bottom, Right | 1 | 111 | Safety key | 1 | 112 | LEFT HANDRAIL INSERT | 1 | 113 | Cvr, Btn, Hand Grip RT | 1 | | Wire harness, Jumper | 1 | | Envelope | 1 | | Wire Harness, Jumper, Black | 2 | | WIRE,JMPR,008",White,M/F 114011B | 1 | | Wire Harness, Red | 1 | | Clip | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | | Lubricant, Treadbelt | 1 | | Accessory Kit | 1 | | GRD,CBL LOOM,11.0",Black | 1 | | Decal, Ground Warning | 1 | | HARDWARE KIT, NOTE: | 1 | | LIT,HRTL07508,TECHSHT | 1 | | Manual, Owner's | 1 | | LITPAC,HRTL075080 | 1 | |
|
