Motor, Incline
|
|
|
Incline motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | LEFT FOOT RAIL | 1 | 2 | Screw | 10 | 3 | Screw | 1 | 4 | Screw | 1 | 5 | Screw | 2 | 6 | Decal,Warning | 1 | 7 | Screw | 4 | 7A | Screw | 4 | 7B | Screw | 25 | 8 | Isolator, Long, Left | 1 | 10 | Spring, Deck, Front | 2 | 11 | Screw | 2 | 12 | Belt guide | 2 | 13 | Screw | 4 | 14 | Screw | 2 | 15 | Deck | 1 | 16 | Treadbelt | 1 | 17 | Roller, Front | 1 | 18 | NLA Magnet | 1 | 19 | Spacer | 2 | 20 | Nut, Nylock | 7 | 21 | NLA Clamp, Sensor | 1 | 22 | RPM sensor | 1 | 23 | Screw | 8 | 23B | Screw | 8 | 24 | Cable Tie, Mounting | 4 | 25 | NLA Motor, Drive | 1 | 26 | Belt, Drive | 1 | 27 | Screw | 4 | 28 | Foot, Rear, Right | 1 | 29 | Foot, Rear, Left | 1 | 30 | Nylock Hex Nut | 2 | 31 | Bolt, Motor | 2 | 32 | Isolator, Deck | 1 | 33 | Cover, Motor | 1 | 34 | Tinnerman Clip | 3 | 35 | Grommet, Strain Relief | 1 | 36 | PIN,CLEVIS,.375X1.800" 215942E | 1 | 37 | Retainer, Pin | 2 | 38 | Screw | 1 | 39 | Hex Nut | 4 | 40 | Motor, Incline | 1 | 41 | Pin, Locking | 1 | 42 | Transformer | 1 | 43 | Refurbished Controller | 1 | 44 | Switch, On/Off | 1 | 45 | BELLY PAN | 1 | 46 | Decal, Warning | 1 | 47 | Power Cord | 1 | 48 | NLA Wire harness, 10" | 1 | 49 | Tool, Belt Adjustment | 1 | 50 | Clamp, Holder, Tie, Flat | 1 | 51 | Wire Tie | 1 | 52 | Cable Tie | 11 | 54 | RAIL,DECK,RT,DKNGY | 1 | 56 | Wire, Jumper | 1 | 57 | Nut | 2 | 58 | Washer, Flat | 1 | 59 | Idler Roller | 1 | 60 | Washer, Lock | 2 | 61 | Bracket, Roller, Rear | 2 | 62 | Screw | 2 | 63 | TV Cable | 1 | 64 | Roller, Rear | 1 | 65 | CMPT,FILTER,W/WIRE,010"189813B | 1 | 66 | Screw | 1 | 67 | Console, Display | 1 | 68 | Bolt | 1 | 69 | Bushing | 1 | 70 | Handlebar, Graphite | 1 | 71 | Washer, Locking | 5 | 72 | Screw | 4 | 73 | UPRIGHT WIRE HARNESS | 1 | 74 | NLA Arm, Idler | 1 | 75 | NLA Spring | 1 | 76 | Latch Assembly, Telescopic | 1 | 77 | Endcap, Rectanglar, Internal | 1 | 78 | Endcap, Round, Internal | 2 | 79 | UPRIGHT ENDCAP, LEFT | 1 | 80 | Screw | 2 | 81 | Bumper, Leveler | 7 | 82 | Screw | 7 | 83 | Cover, Leg, Extension | 2 | 84 | Decal, Caution, English | 2 | 86 | Holder, Book | 1 | 87 | EXTENSION LEG BOLT | 4 | 89 | Wheel, Transport | 2 | 91 | NLA Monitor, Chest, Heart Rate | 1 | 92 | SCREW,ABPHTHSMS,BZP,#8X2.5 | 4 | 93 | Hex Nut | 2 | 94 | LIFT FRAME | 1 | 95 | Door, Pulse | 1 | 96 | Wire, Jumper | 1 | 97 | EXTESION LEG | 2 | 98 | Base, Console | 1 | 100 | Fan, 4" | 1 | 101 | Spacer | 2 | 102 | Washer, Flat | 2 | 103 | Safety Key | 1 | 104 | Screw | 4 | 106 | Strap, Heartrate | 1 | 107 | CHEST PULSE RECEIVER | 1 | 108 | Tape, Receiver, Pulse | 1 | 109 | Nut, Hex | 1 | 110 | Washer, Flat | 1 | 111 | TV, LCD, 7" | 1 | 111A | Lens, TV | 1 | 111B | TV, LCD, 7" | 1 | 112 | Lens, Console | 1 | 113 | Screw, Self Drilling | 6 | | Wire harness, Jumper | 1 | | Envelope | 1 | | SCREW,BTPHPNHSMS,ZP,#4X5/16" | 6 | | Wire Harness, Red | 1 | | Clamp, Cable, Long | 1 | | Wire, Blue | 1 | | Wire Harness | 1 | | WIRE,JMPR,008",GRN,F/R 190907B | 1 | | Kit, Lube | 1 | | Decal, Motor Cover | 1 | | Lubricant, Treadbelt | 1 | | Accessory Kit | 1 | | DECAL,LT RAIL'SPACESAVER" | 1 | | TECH SHEET | 1 | | DECAL, FRAME, FULL STRIDE | 2 | | DECAL, HOOD, "OUTLOOK" | 1 | | DECAL, UPRT, "HEALTRIDER" | 2 | | Knob | 1 | | NLA Endcap, Latch | 1 | | HARDWARE KIT | 1 | | DECAL, CNSL,"HEALTHRIDER" | 1 | | LITPAC,HRTL894062 | 1 | |
|
