Motor, Incline
|
|
|
Incline actuator motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 16 | 2 | M4 X 25MM SCREW | 4 | 3 | WIRE,JMPR,008",GRN,F/R 190907B | 1 | 4 | Screw | 4 | 5 | Screw | 4 | 6 | Bolt | 4 | 7 | Washer, Star | 1 | 8 | Washer, Locking | 8 | 9 | Washer, Flat | 4 | 10 | Washer | 4 | 11 | Screw | 5 | 12 | Screw | 10 | 13 | Screw | 3 | 14 | M8 X 35MM SCREW | 2 | 15 | Screw | 2 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | Screw | 1 | 19 | Screw | 1 | 20 | Screw | 2 | 21 | Screw | 1 | 22 | Screw | 7 | 23 | Screw | 8 | 24 | Screw | 2 | 25 | Screw | 2 | 26 | Screw | 1 | 27 | Screw | 2 | 28 | Screw | 4 | 29 | Washer | 2 | 30 | Washer, Flat | 2 | 31 | Nut, Nylock | 3 | 32 | Nut, Motor | 2 | 33 | Nut, Locking | 4 | 34 | Wrench, Allen | 1 | 35 | Hex Nut | 4 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | CAGE NUT | 4 | 39 | NLA Rail, Deck, Left | 1 | 40 | Spring, Deck | 2 | 41 | Guide, Belt | 2 | 42 | Magnet | 1 | 43 | Belt, Drive | 1 | 44 | Roller, Front | 1 | 45 | Treadbelt | 1 | 46 | Deck | 1 | 47 | NLA Rail, Foot, Right | 1 | 49 | Decal, Label, Warning | 1 | 50 | Spacer | 2 | 51 | NLA Foot, Left | 1 | 52 | NLA Foot, Rear, Right | 1 | 54 | RPM sensor | 1 | 55 | Retainer Clamp | 1 | 56 | Wheel, FLAT,.39X1.5X.5" 141173A | 2 | 57 | WIRE,JMPR,006",Black,M/F 114011D | 1 | 58 | Motor, Incline | 1 | 59 | NLA Bracket, Roller, Rear | 2 | 60 | DRIVE MOTOR ASSEMBLY | 1 | 61 | Bracket, Motor | 1 | 62 | Wire tie | 3 | 63 | FRAME,LIFT,LSDTX,ARPS | 1 | 64 | Wire Harness, Filter | 1 | 65 | Power Cord | 1 | 66 | Controller, MC2100-12A | 1 | 67 | Grommet, Strain Relief | 1 | 68 | Switch, On/Off | 1 | 69 | Cover, Motor, Lower | 1 | 70 | Insert, Latch | 1 | 71 | NLA Arm, Upper, Left | 1 | 72 | Pin, Latch | 1 | 73 | Upright, Left | 1 | 74 | Screw | 2 | 75 | Endcap, Arm | 2 | 76 | NLA Arm, Upper, Right | 1 | 77 | Wire Harness, Upright | 1 | 78 | Upright, Right | 1 | 79 | Spacer | 4 | 80 | RIGHT UPRIGHT SPACER | 1 | 81 | Bumper, Leveler | 4 | 82 | Endcap, Base | 2 | 83 | LEFT UPRIGHT SPACER | 1 | 84 | Decal, Caution, English | 2 | 85 | Frame, Upright base | 1 | 86 | Wheel | 2 | 87 | NLA Console, Display | 1 | 88 | Base, Console | 1 | 89 | LEFT HANDRAIL | 1 | 90 | RIGHT HANDRAIL | 1 | 91 | Endcap, Handrail | 4 | 92 | Cable Tie, Mounting | 2 | 93 | Safety Key | 1 | 94 | Wire Tie | 2 | 95 | Cable Tie | 8 | 96 | NLA Cone, Resistance | 2 | 97 | Grip, Handlebar | 2 | 98 | Clamp, Cable, Long | 3 | 99 | Spacer | 1 | 100 | NLA Roller, Rear | 1 | 101 | Tool, Belt Adjustment | 1 | 102 | Wire, Jumper | 1 | 103 | End Cap, Rectangle, Internal | 2 | 104 | Spacer | 2 | 105 | Tool, Wrench | 1 | 106 | Wrench, Allen | 1 | 107 | PLATE,INCLN,1.19X1.19"L162344A | 1 | 108 | Washer | 1 | 109 | Wire Harness, Jumper, Blue 6" | 1 | | Envelope | 1 | | Wire, Jumper, Blue | 1 | | Wire, Jumper, 6", Red | 1 | | WIRE,JMPR,006",BLU,F/F 109407E | 1 | | Decal, Console, Unplug | 1 | | Decal, Caution | 2 | | Accessory Kit, Canada | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | | Lubricant, Treadbelt | 1 | | Accessory Kit | 1 | | CNSL "PROFORM" LOGO DECAL | 1 | | Decal, Hood, Proform | 1 | | DECAL,WARNING,LATCH/INCLN,FR | 1 | | Decal, Warning, Surge, French | 1 | | Decal, Hood, Running Man | 1 | | Decal, Arm Crosswalk | 2 | | HARDWARE KIT NOTE: | 1 | | Power Cord | 1 | | LITPAC,PFTL390070 | 1 | |
|
